𝐅𝐑𝐄𝐄 𝐒𝐇𝐈𝐏𝐏𝐈𝐍𝐆 | 𝐎𝐫𝐝𝐞𝐫𝐬 𝐎𝐯𝐞𝐫 $𝟏𝟎𝟎

ArtyBox Regular Epoxy - Technical Data

TECHNICAL DATA

 

Mixing Ratio: Equal parts Resin to Hardener (1 : 1)

Pot Life (Working Time): 40 minutes @ +20°C (+68°F)

Drying Time: Dry to touch 16 hours @ +26°C (+79°F) | Full cure 72 hours @ +26°C (+79°F)

Temperature variance will affect curing time; we do not recommend application below +10°C (+50°F).

Appearance & Finish: Clear and Glossy

Solids Content: 100% (ASTM D2697)

VOC Content: Part A Resin and Part B Hardener combined contain 0 g/L of VOC

Viscosity: 1400 CPS @ +25°C

Specific Weights: Resin 4.35 kg (9.6 lbs) / 3.78L (1USG) | Hardener 3.67 kg (8.1 lbs) / 3.78L (1USG)

Temperature Limits:    Dry Heat +110°C (+230°F)

                                      Spills +66°C (+150°F)

                                      Immersion +66°C (+150°F)

                                      Cold -40°C (-40°F)

Above temperature limits are laboratory test results. Our Epoxy Resin is non-flammable.

Flash Point: Greater than +280°C (+536°C)

Cured Resin Performance:

                                                Elongation at break 30 – 80% depending on                                                          temperature (ASTM D638)                                                                                     

                                                Adhesion 350 psi (ASTM D4541)

                                                Fungus/Bacteria resistance resulted in no support                                                  of growth (Mil-F-52505)

Clean Up: Disposable mixing containers/tools are recommended. Otherwise, a solvent based cleaner can be used.

Shipping Information: Class 8 DG, UN 1760, PG III (Part B Hardener only)

Shelf Life: Approximately 1 year unopened